How Do I Set Up a Pet Safe Wireless Fence

How Do I Set Up a Pet Safe Wireless Fence?

Our pets mean more to our life than they can seem. Not only companionship, and emotional connection, people really and gladly change their actions when they own a pet. Cats make people feel loved, dogs make people feel secure. 

Animals give people unconditional love. Since the feeling is mutual, it makes sense then to make pets safe and secure within the confines of the home.

How it works

This GPS-based pet fence system uses a radio signal that works with a receiver on a pet collar that receives an alert when he has wandered too far from the house. If your pet is within a custom-set range, he will not be bothered at all. 

Once the pet is drawing close to the fence boundary, the receiver will beep to warn him of the danger. Continuing this course of action will bring a noticeable but harmless signal that will get his attention and will bring him back inside the safe range. 

Many more pet owners are choosing to install the petsafe wireless fence to do exactly that. This fence allows you to create a secure circular-shaped boundary around your yard. Petsafe system frees you of the hassle of working with a physical fence or burying a protective wire. 

The Petsafe wireless fence also features different levels of correction. It can accommodate an unlimited number of pets. It also features a simple set-up. Here is a series of information on the configuration of the petsafe wireless fence. 

Laying Out the System

Choose a location for the transmitter

Once you have the package, don’t forget to install the transmitter where it is dry and secure. It needs to be well-ventilated and not exposed to below freezing temperatures. It should be on the ground floor. 

The transmitter may sit on a table or can be wall-mounted. Be sure to complete the installation before mounting the transmitter. Make sure that the location of your petsafe wireless transmitter work for you.

Adjusting Settings

Be sure to first consider the layout of your yard. Think of the area you want to create for your pet to move in. The transmitter should be in the center of what will be the circular containment area for your pet. 

Once you have put the transmitter where it is safe and ready for operation, plug it in and adjust the switch of the boundary to high and the boundary control settings to 8. If you feel like this creates a big enough perimeter for your property, you will be able to go back and turn it back down to the right settings later. 

Remember that you will also move the transmitter within your property to properly adjust the location and range of the containment as needed. 

When ready to test the border area, make sure you check the battery on the receiver collar. Also, set the correction level to number 2 or above. Make sure the test lights work. Try to walk towards the limit area while holding the receiver collar at your pet’s neck level until you see the flashing test light. 

Adjusting the Boundary

You can adjust the limit using two methods: the one-person and two-person methods. In the one-person method, you should measure the shortest distance between the boundary area and the transmitter. 

It would take a couple of going back and forth to the boundary zone in order for you to find the correct desired setting with the receiver and the transmitter. Make sure to set the boundary switch and the control dial.

 If the receiver collar beeps before or after the supposed boundary zone, you can readjust the settings of the transmitter to the correct dial. Continue repeating this process until you have the right setting where the beeping collar in the right place of your preference. It is useful to note your settings for future references. 

For the two-person method, a person must hold the receiver collar at your pet’s neck height (ankle length), and walk out on the yard to the edge of the desired boundary.  

The second person must be next to the transmitter, marking the transmitter settings slowly according to the desired border settings. You can use cell phones or walkie-talkies to help make communicating during this process easier.

Checking the Pet Collar

Once you are done with the transmitter, you can move on to the collar. Use the test light tool to properly tighten the contact points on the collar. These points of contact have optional long points for pets with thick hair. Use the side of the contact wrench to switch the battery on. You should then see the collar light up to let you know that it is on and receiving the signal from the transmitter.

Installing training flags

When you are satisfied with the border you set up, walk the fence run again with the collar, marking where the collar beeps using the training flags. This will help your pet visually identify where the limit is during the training phase. After that, you are ready to fit the collar to your pet and begin training. 

Conclusion

Pets provide companionship, love, and affection. It is important to keep them safe with the use of a petsafe wireless fence. It is easy to install and can be done using a one-person or two-person set-up. 

Training flags are important to put around the boundary of the petsafe wireless fence in order to give your pets a visual reference to look at during the training phase. Once you have gone through the set-up process, your pet will be one step safer within the confines of the petsafe wireless fence. 

This type of pet protection will require no maintenance and will be able to last for years. You can consider this to be the best thing you got for your pet, allowing them to roam safely on his own and affording yourself much-needed peace of mind. The next step should be adopting more pets!

You may also like:   How to fix a door frame that has shifted?