How To Remove Bathroom Sink Drain?

How To Remove Bathroom Sink Drain?

How to remove the bathroom sink drain? The bathroom sink drain can be removed in a few steps that will help to properly detach the curved pipe underneath it (the P-trap).

How to seal a sink flange? Clear the area around the sink drain of any build-up material. Apply silicone caulk to the sink drain hole. Apply a second silicone caulk along the drain flange’s underside.

What’s a sink flange, you ask? A sink flange is a collar around the drain of your bathroom sink. The flange is typically made from metal but can also be made of plastic with a metallic coating. This flange can crack or erode and allow water to leak into the sink.

What can I do to remove a bathroom sink faucet that has become corroded? Dissolve the hard water residue. Undiluted white vinegar can be used to soak the area. The vinegar can be soaked in a cloth and applied directly to the corrosion. Or, you can spray the vinegar onto the area. You can then rinse the area and dry it.

How exactly to remove a bathroom sink drain

Every bathroom has a bathroom sink and every sink has got a sink drain. If your sink drain needs replacing for any reason, you can replace it yourself or call a plumber. While calling a plumber might sound like the better option, it is often quite expensive. This is especially true because replacing a bathroom sink drain is something that you can do yourself easily in about half an hour. To remove your bathroom sink drain, you will need several tools. The most important ones are a pair of water pump pliers and a putty knife. Once you get these two tools, you should follow the steps below.

How to remove a bathroom sink drain in 5 steps 1. Prepare the work area

To make your work easy, you should prepare your work area. First, you should dry any water in the work area to avoid slipping and falling when working.

Second, you should remove any removable drawers underneath the sink and open the doors wide and secure them in the open position. You need as much space as you can get and as much wiggle room as you can get, to easily and quickly remove your sink drain. Of course, you should also remove everything that you have stored underneath your bathroom sink. Again, this will free up space for you to work.

2. Remove the P-shaped trap

To remove your bathroom drain, you need to remove the P-shaped trap or P-trap underneath your sink. The P-trap is the curved pipe connected to your sink’s drain pipe. It is where all the waste water from your sink is directed into.

You should find the nut that fastens it to your sink’s drain pipe. There is often some waste water in the pipe so remove it carefully to avoid spilling the water. Once you find the nut, loosen it a bit and then loosen the nut on the opposite end of the trap connecting it to the wall inlet.

Once you have removed both nuts, you should gently wiggle the P-trap to detach it and then dump the water in your toilet.

3. Remove the lift rod

The lift rod is attached to the drain pipe and the drain pipe won’t come out properly if you attempt to remove it without removing the lift rod. Once you remove the lift rod you should be able to remove the stopper inside your bathroom sink.

4. Remove the lock nut

Once you have removed your stopper, you should remove the lock nut fastening the drain pipe to the sink. It may take you some time to remove the lock nut because in most cases they are a bit rusty. After removing the lock nut, you should try to wiggle the drain pipe assembly up to expose the ring on top. With the ring exposed, you can unscrew it. You may or may not need pliers to do this. With the ring removed you can simply pull out the rest of the drain assembly below.

Caution

Many people regularly use a powerful and corrosive chemical drain cleaner to clean their sink drains. If you do this, you need to use heavy-duty rubber gloves when removing your bathroom sink drain pipe/assembly. This will protect your hands from damage.

How to keep your bathroom drain pipe clean

1. Dump boiling water in your sink

Dumping boiling water in your sink is the easiest way to ensure your drain pipe is clean and remains clean for a long time. Because you regularly use soap to wash your hands and other detergents to wash your face, the soap usually goes and sticks to the drain pipe.

When you wash your hair or groom your pet in your bathroom sink, the hair also goes and gathers in the drain pipe. All the things that stop in the drain pipe can easily form a ball and clog it.

However, when you regularly dump two or three buckets of boiling water in your sink, you will dissolve and flush everything out before any serious clogging occurs.

Add two or three tablespoons of water to every bucket to increase the cleaning power of every bucket of water.

2. Use vinegar

You most probably have vinegar in your kitchen. While many people know that vinegar is for cooking, what most people do not know is that vinegar can also be used to clean a sink drain.

This is because it can remove dirt and debris in the sink drain and also eliminate foul smells. The best thing about vinegar is that despite its massive cleaning power, it is not toxic or corrosive. You can virtually use it to clean any type of sink.

To use vinegar to clean your sink, create a solution of one part vinegar and two parts water. This solution will be enough to give your drain pipe a thorough cleaning. Give the solution about one hour to work before rinsing it with water.

If you want to increase the cleaning power of your vinegar solution add baking power to it. Baking powder is known to dissolve hard debris and clogs. You should add about a cup of it to your vinegar solution and wait for about one hour for the solution to work in your drain before rinsing it.

3. Regular cleaning

The easiest way to keep your drain pipe clean is to clean it regularly. When you clean your drain pipe regularly, you can quickly identify bad habits or issues and fix them before they become big issues that cost a lot of money to fix. Regular cleaning also allows you to keep your bathroom drain clean and clog-free.

4. Drain snake

In some cases, the debris or clog formed in your sink drain is too hard to remove using boiling water or vinegar. If so, you should get a drain snake for the job. There is often no clog too hard for a drain snake to remove.

How to Remove Bathroom Sink Drainage – Similar Questions

How can you get rid of hardened plumbers glue?

You can remove any residue using a paint thinner, mineral spirit, or a paint thinner. Use a paint thinner, mineral spirit or a rag to clean the residue. The same process can be used to remove hardened putty from drain flanges or faucets as for a plumbing joint.

How can you take out a strainer flange from your hand?

Lock the bolt.

Use 16-in. Slip-joint or spud wrench are required to remove the kitchen sink strainer locknut. To stop the basket from spinning, insert the handles of the pliers into its strainer grate.

Can I reuse a sink flange?

The flange will be located in the bottom of your sink or under the drain. To remove the top ring from the flange, you’ll need a flat screwdriver. The flange cannot be reused if it is bent.

Which is better, silicone or plumbers glue?

Both silicone and plumber’s putty are water-tight sealing compounds that can be used to seal pop up drains, drain strainers, undersides or fittings, drains, and showers. While silicone caulking may be more recent, plumber’s putty has a more traditional look. However, either can do the job in most cases.

Is silicone possible to seal a sink’s drain?

Sealing your kitchen sinks and sealing the drains with silicone will help keep them in good shape and prevent any future problems. A high-quality, waterproof sealant will prevent water and debris entering the cracks.

Is it possible to caulk a sink’s drain?

A sink drain can be sealed with silicone caulk or plumber’s putty. Seal the space between the sink’s drain body, and the sink’s actual surface. If you don’t seal the area between the drain body and the sink surface, water can leak out and start leaking under the sink.

Is there a sink flange nearby?

The sink drain flange, a flat metal disc that fits into the drain hole at bottom of sink, is a flat metal plate. The flange is usually shaped like a strainer and has a grid-like pattern over the hole. The drain is held up by the flange, which is connected to it by a straight piece called a tailpiece.

Do you require a drain wrench for your plumbing needs?

Two crossbars made of metal form an “X” in drain fittings to stop large objects from falling into the drain. These crossbars make it possible for you to remove the drain using a wrench or pliers. You will need a tub drain extractor if your drain does not have crossbars.

What’s a basket wrench?

The Masterforce basket strainer wrench can be used to secure basket strainers during installation. This 2-sided wrench is compatible with most basket strainers.

I can’t seem to get the handle of my bathroom faucet off.

Wrap a towel around the valve stem to loosen it. Give it a light tap with a hammer, and then try again. Spray lubricant or a few drops in the area between the valve stem and handle. After waiting a while, tap the handle to loosen it. Place a piece of scrap wood on the faucet’s body.

Is it possible to use wd40 in a faucet?

Clean an Aerator

Apply WD-40 Penetrant Spray if the aerator doesn’t move with any kind of gentle movement. After cleaning, attach the aerator and tighten it. Run the faucet briefly to remove any lingering clogging.

What are the best times to not use plumbers glue?

You should not use plumber’s putty if you require adhesive strength (to attach materials or prevent them moving) or a watertight seal around exposed areas.

How can you dissolve plumber’s glue?

Use a soft, clean cloth to apply a little acetone-based nail varnish remover. Use a small amount to apply the polish. It is important not to soak it. If necessary, gently remove the glue and continue the process several times.

Is it possible to soften plumber’s putty?

The product will eventually harden and you’ll have to soften it before you can use it. Heating plumber’s glue can cause serious health problems. The microwave can dry the putty out and cause damage to its sealant properties.

Can you reuse bathroom sink drain?

Yes, you can replace the drain and the pop-up assembly all by yourself. This assembly is often included with a new faucet. However, it can be purchased separately at most home improvement stores or other retailers that sell plumbing products. Any DIY-er can easily replace the faucet.

Who installs a garbage disposal plumber?

For your garbage disposal problem, you should call a plumber. When it comes to fixing your garbage disposal problem, plumbers are the best. A plumber will most likely have installed your garbage disposal. They are skilled in solving all kinds of problems, including electrical.

Is it difficult to remove a sink?

If the sink is older and the hardware and pipes are rusted, it may be harder to remove. If necessary, replace any rusted pipes or patch holes in your wall.